Cooler FFP2V Dust Mask With Valve / Soft Nose Foam Added
1 . Product Description
Outer layer : Protective PP spun-bonded non-woven
Middle layde : FFP1 melt blown filter(have filter efficiency level
Inner layer : Shaped needle punched cotton
1. The disposable particulate respirator is designed to help
provide quality, reliable respiratory protection for the
2. Advanced electrostatically charged microfibers which make
breathing easier and cooler.
3. The proprietary Exhalation Valve reduces heat build-up inside
the respirator to help keep the wearer more comfortable.
4. The soft inner material provides added comfort while the soft
nose foam and adjustable nose clip help provide a custom fit.
5. These features are designed to enhance user comfort and help
increase wear ability.
2. Directions for use
- The mask is only for single use .
- The mask should't be removed from its packaging until its required
- Use the respirator in accordance with applicable health and safety
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- Fit the respirator and check leak-tightness before entering the
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
- If maintained as per storage instructions , product can be used up
to 5 years from date of manufacture.
3 . Recommended applications include:
- Cutting and Casting of Metals
- Disposal of Toxic Waste
- Iron and Steel Industry
- Manufacture of Batteries
- Pharmaceutical industry
- Textile industry
- Underground Civil Engineering
- Welding work
4 . FAQ
Q: Can you provide free samples?
A: All samples are provided freely, it will takes3-5 days to
prepare the samples.
Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production
samples. Meanwhile, we have a complete after-sales system.
Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face
mask, OEM production is ok.